model no. 062-3428-8 | contact us 1-800-689-9928
4
TECHNICAL SPECIFICATIONS
CAUTION:
This pump has been evaluated for use with water only.
Model Number 062-3428-8
Electrical Rating 120 V / 60 Hz / 5 A
Inlet / Outlet Diameter 1" (2.5 cm) NPT
Maximum Flow 950 U.S. GPH (3596 L/h)
Maximum Suction Lift 26' (7.9 m)
Maximum Delivery Height 100' (30.5 m)
Air Bladder Pressure 23 PSI
Start Pressure 20 PSI
Stop Pressure 35 PSI
Power Cord Length 7' (2.1 m)
Discharge Size 1" (2.5 cm) national pipe thread (NPT)
Suction Size 1 1/4" (3.2 cm) national pipe thread (NPT)
TECHNICAL SPECIFICATIONS
NOT FOR POTABLE WATER
NOTE: Performance of this pump (if powered by line voltage) may vary depending on variations in local line
voltage. Extension cord usage may also affect pump performance.
Before start-up, note the following: The pump can be connected to any shock-proof plug which has been
installed according to regulations. The plug must have a supply voltage of 120 V~, 60 Hz.
Fluid Type: The pump is designed for use with water with a maximum temperature of 77°F (25°C). Do not use
the pump for other fluids, especially not fuels, cleaning fluids, or other chemical products.
0' (0 m)
20' (6.1 m) 40' (12 m) 60' (18.2 m)
950 GPH
(3596 L/h)
825 GPH
(3123 L/h)
650 GPH
(2460 L/h)
475 GPH
(1798 L/h)
80' (24.3 m) 100' (30.5 m)
250 GPH
(946 L/h)
20 GPH
(75.7 L/h)
Max. Head
100'
(30.5 m)
PERFORMANCE
To Next Page
Loading...
Need help?
General
