headline bars
continuation tabs
notes
warnings
headline bars
continuation tabs
notes
warnings
model no. 062-3503-8 | contact us 1-800-689-9928
6
TECHNICAL SPECIFICATIONS
TECHNICAL SPECIFICATIONS
Temperature 32 to 77°F (0 to 25°C)
Impeller Plastic
Solids handling 1/4” (6.3 mm) spherical
Discharge size 1 1/4” (3.2 cm) male national pipe thread (MNPT),
1 1/4” (3.2 cm) female national pipe thread (FNPT) with
elbow
Seal Lip seal
Cable entry 8’ (2.55 m) quick-disconnect cord with male terminal
Upper bearing Ball bearing
Lower bearing Ball bearing
Power 12 V DC
Motor protection Overload protection in lead
Construction material Steel for motor house, plastic for volute and impeller
Maximum flow 2000 U.S. GPH (7571 L/hr)
Maximum head height 16’ (4.9 m)
MOTOR AND ELECTRICAL
SKU number 062-3503-8
Volt 12 V DC
Cord size 18 AWG
Cord type SJTW
NOTE:
Do not reduce size of discharge pipe or hose below 1 1/4” (3.2 cm) diameter.
If discharge is too small, pump will overheat and fail prematurely.
This pump is designed for use as a residential sump only. Only pump
water with this pump.
To Next Page
Loading...
