EasyManua.ls Logo

MasterCraft 54-4790-6

MasterCraft 54-4790-6
39 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
AVAILABLE ACCESSORIES
WARNING: Use only accessories
that are recommended for this rotary
tool. Follow the instructions that
accompany the accessories. The use of
improper accessories may result in
injury to the operator or damage to the
rotary tool.
Before using any accessory, carefully read
the instructions or the owner’s manual for
the accessory.
Grinding stones
Cut-off wheels
Polishing wheels
Wire brushes
Bristle brushes
Sanding drums
Cutting bits
Drill bits
Dressing stones
WARNING: If any part is missing or
damaged, do not plug the rotary tool into
the outlet until the missing or damaged
part has been replaced.
CONTENTS
Carefully unpack the rotary tool and all of
its components. Compare the contents
against the following chart entitled “Rotary
Tool Components”.
NOTE: See the illustrations of the rotary
tool and accessories on the following
pages.
WARNING: In order to avoid the risk
of fire or toxic reaction, do not use
gasoline, naphtha, acetone, lacquer
thinner, or similar highly volatile solvents to
clean the rotary tool.
!
!
!
ACCESSORIES AND CONTENTS
ROTARY TOOL COMPONENTS
KEY
DESCRIPTION
QTY
A
Rotary cutting tool
1
B
Detail sanding pad
1
C
Contour sanding pads
Wedge
Convex
Concave
1
1
1
D
Batteries for the LED
worklight
2
E
Stand assembly
1
F
LED worklight assembly
1
G
Flexible shaft
1
H
Slide-out storage
containers with
accessories
See the following
pages for the list of
accessories
2
I
Tote bag
1
J
Angle attachment with
vacuum adaptor
1
K
Circular saw attachment
1
L
Sander attachment
1
M
Right angle attachment
1
Owner’s Manual
(not shown)
1

Related product manuals