GENERAL PURPOSE SANDING
WARNING: Never use the palm belt
sander as a wet sander. The tool will be
damaged and possibly become a fire
hazard.
WARNING: Never use the palm belt
sander to sand any metal containing
magnesium. Magnesium could become a
fire hazard.
For safety reasons, the operator
must read the sections of this
Owner’s Manual entitled “GENERAL
SAFETY WARNINGS”, “POWER
TOOL SAFETY”, “SPECIFIC SAFETY
RULES”, “EXTENSION CORD
SAFETY” and “SYMBOLS” before
using this palm belt sander.
Verify the following every time the
palm belt sander is used:
1. Safety glasses, safety goggles,
or face shield is being worn.
2. Hearing protection and dust
mask are being worn.
3. The sanding belt is in good
condition and is the correct type
for the workpiece.
4. The sanding belt is tracking in
the centre of the rollers.
5. The power cord is clear of the
sanding belt path.
6. The workpiece is clear of any
foreign materials such as nails.
Failure to observe these safety rules
will significantly increase the risk of
injury.
To Next Page
Loading...
