GENERAL
WARNING: When servicing, use
only identical replacement parts. The
use of any other part may create a
hazard or cause damage to the product.
DO NOT use solvents when cleaning
plastic parts. Plastics are susceptible to
damage from various types of commercial
solvents and may be damaged by their
use. Use a clean cloth to remove dirt, dust,
oil, grease etc.
WARNING: Do not allow brake
fluids, gasoline, petroleum-based
products, penetrating oils, etc. to come
into contact with plastic parts. These
substances contain chemicals that can
damage, weaken or destroy plastic.
Keep the air vents cleared of any built up
dust to prevent the motor from
overheating. Remove accumulated dust
and debris regularly using a soft DRY
brush.
DO NOT abuse power tools. Abusive
practices can damage the tool and the
workpiece.
WARNING: DO NOT attempt to
modify tools or create accessories. Any
such alteration or modification is
misuse and could result in a hazardous
condition leading to possible serious
injury. It will also void the warranty.
LUBRICATION
All of the bearings in this tool are
lubricated with a sufficient amount of high-
grade lubricant for the life of the unit under
normal conditions. Therefore, no further
lubrication is required.
To Next Page
Loading...
