Once the engine starts, it may stop immediately. If so, repeat the starting procedure.
Once the engine starts and does not stop immediately, allow it to run for 15 seconds and then
gradually move the choke lever to the left (RUN) position (i.e. proper mix of air and fuel).
CAUTION:
Do not allow the starter cord to snap back against the engine. Return it gently to its starting
position to prevent damage to the starter or the housing.
If the engine does not start after many pulls, check the spark plug. If the spark plug is saturated
with fuel and/or carbon deposits, clean or replace with a clean spark plug.
EXPLODED DRAWING
22
To Next Page
Loading...