MasterCraft 55-3559-4 User Manual

Installation of Sanding Disc and Guard
1. Peel backing away from sanding disc.
2. Align perimeter of disc with plate, and press disc firmly into position on plate, leaving no loose
edges.
3. Position disc guard against lower 1/3 of disc, aligning holes as shown.
4. Use a screwdriver to fasten the provided screws and washers securely.
8

MasterCraft 55-3559-4 Specifications

General

Brand	MasterCraft
Model	55-3559-4
Category	Sander
Language	English