PRODUCT INFORMATION FOR
THE XSTAR VIDEO TOUCH AND
STATIC (NONTOUCH) SCREENS
The XStar video screens consist of one (1) 4.5” video touch screen,
one (1) 4.5” static, non-touch screen, and one (1) 7” touch screen. A
unique feature is that the 4.5” video touch screen and the 7” touch
screen are linked.
Some changes made on either are displayed on both. The 4.5”
static, non-touch screen is independent of the other two screens
and displays engine and transmission parameters and service
codes. These are multi-functional tools that provide GPS tracking,
multi-media display, cruise control, rider profiles, and enables equip-
ment operators to view a wide range of engine, ballast, transmission
parameters and service codes.
CARE AND MAINTENANCE
Only basic cleaning should be required to maintain the screens at
their best. A soft cloth can be used for cleaning the units. Typical
window cleaner or rubbing alcohol can also be used to clean the
glass portion of the video screen display. Do not use harsh or abra-
sive cleaners on the unit.
Avoid contact between sharp or hard objects and the video touch
screen because this can result in scratches or other permanent
marks on the screen. Clean only with a soft cloth, using window
cleaner or rubbing alcohol only. Never use harsh or abrasive clean-
ers on the unit, as this may result in damage to the unit that is not
covered under warranty.
BASIC NAVIGATION FEATURES
All features are easily accessible through the quick access keys,
touch point commands and menus. Some navigation is linked
between the 4.5” touch screen and the 7” touch screen, with data
shared between the units.
To Next Page
Loading...
Need help?
General
