MasterCraft X23 User Manual

NEW BOAT
BREAKIN
The first fifty (50) hours of operation are the most important for establishing acceptable wear parameters
for the boat. Proper break-in will ensure maximum performance and the longest possible power-train life.
The break-in period allows moving parts within the engine and transmission to wear-in properly. All Master-
Craft boats are lake-tested on the water before leaving the factory, but the break-in must continue for the
first fifty (50) hours of your ownership.

MasterCraft X23 Specifications

General

Beam	102 inches
Seating Capacity	16 People
Surf System	Gen 2 Surf System
Weight	5, 500 pounds
Engine Options	Ilmor 7.4L MPI
Tower	ZFT4
Engine	Ilmor 6.0L MPI