2016 OWNERS MANUAL / 0189
While operating attitude adjustment plates use caution. Improper
use of plates can cause accidents, which may result in serious
injury or death. While the boat is underway do not move one plate
up or down significantly as this may cause listing. While at higher
speeds do not over-trim, as this will cause the bow to lower quickly,
resulting in a reduction of speed and may cause the boat to veer.
When in following seas or when running an inlet, the plates should
be fully retracted. This will allow for optimal performance.
ELECTROMECHANICAL ACTUATORS PROVIDE AN INSTANT
RESPONSE. WHEN MAKING ADJUSTMENTS, USE SHORT
MOMENTARY TAPS OF THE SWITCH.
P = Horn. The horn is sounded by means of a button on the
instrument panel. Pressing the button emits a loud and
recognizable noise.
To Next Page
Loading...
Need help?
General
