þ
þ
þ
energy
bulbs
.co.uk
Mon-Fri: 8:30am - 6:30pm | Sat & Sun: 11am - 5pm
0800 043 8978
or
0121 250 2180
Quick Order Hotline
Guaranteed Low Prices
Huge Stock Available
Mastervolt Stockist
GENERAL INFORMATION
4 October 2011 / Sunmaster XS4300-3200-2000 / EN
1 GENERAL INFORMATION
1.1 PRODUCT DESCRIPTION
Congratulations for choosing the Mastervolt Sunmaster
XS4300, the Sunmaster XS3200 or the Sunmaster
XS2000, further referred to as “Sunmaster”. The
Sunmaster is a grid connected solar inverter, used for the
feed back into the utility grid of power generated by
photovoltaic modules.
Depending on the application and in order to meet the
local applicable regulations, the Sunmaster can be
ordered in several models. See chapter 3.2 for an
overview of the available models.
The Sunmaster is not suitable for stand-alone use (i.e. use
without public grid).
1.2 USE OF THIS MANUAL
Copyright © 2011 Mastervolt. All rights reserved.
Reproduction, transfer, distribution or storage of part or all
of the contents in this document in any form without the
prior written permission of Mastervolt is prohibited. This
manual serves as a guideline for the safe and effective
installation of the Sunmaster:
• For the electrician this manual gives directions for the
installation, operation and commissioning.
• For the end-user this manual gives directions for the
operation, maintenance and possible correction of
minor malfunctions of the Sunmaster.
• Every person who works with the apparatus should be
familiar with the contents of this manual, and must
carefully follow the instructions contained herein.
• Store the manual in a user accessible place.
This English manual has 32 pages.
1.3 VALIDITY OF THIS MANUAL
All the specifications, provisions and instructions contained
in this manual apply solely to the Mastervolt-delivered
standard versions of the Sunmaster (Refer to chapter 3.2).
1.4 GUARANTEE SPECIFICATIONS
Mastervolt assures the product guarantee of the
Sunmaster during five years after your purchase, on the
condition that all instructions and warnings given in this
manual are taken into account during installation and
operation.
Among other things, this means that installation is carried
out by a qualified electrician, that installation and
maintenance are executed according to the stated
instructions and correct working sequence and that no
changes or repairs may have been performed on the
Sunmaster other than by Mastervolt.
The warranty is limited to the costs of repair and/or
replacement of the product by Mastervolt only. Costs for
installation labour or shipping of the defective parts are not
covered by this warranty.
For making an appeal on warranty you can directly contact
your supplier, stating your complaint, application, date of
purchase and part number / serial number
1.5 LIABILITY
Mastervolt accepts no liability for:
• consequential damage due to use of the Sunmaster;
• possible errors in the manuals and the results thereof.
1.6 CHANGES TO THE SUNMASTER
Changes on the Sunmaster may be carried out only after
the written permission of Mastervolt
1.7 IDENTIFICATION LABEL
See figure 1-1 for location. Important technical information
required for service, maintenance & secondary delivery of
parts can be derived from the identification label.
CAUTION!
Never remove the identification label.
Figure 1-1
Identification label
To Next Page
Loading...
Need help?
General
