38
User Manual
MDMAXPROHD
www.matcotools.com 877-853-3738
• Tap to call out more function options.
• Add friend: It is disabled if you have added the partner as your
friend.
• File: Choose diagnostic reports or local les to send.
• Picture: Choose screenshots or pictures to send.
• Tech 2 Tech: To start a remote diagnostic session. For details,
refer to Chapter 6.2.4.
• Camera: Open camera to take pictures.
• Tap “Clear” to delete all the partner’s dialog logs.
6.2.4 Launch Remote Diagnosis
The tablet is allowed to initiate remote diagnosis with other diagnostic
tools (including but not limited to the MAXIMUSPROHD) of Matco &
Launch
family, which are equipped with this module.
* Note: Before performing this operation, please make sure the
following conditions are met no matter which side sends the
remote request:
Turn on the vehicle power supply.
Throttle should be in a closed position.
The VCI dongle should be properly connected to the vehicle’s DLC
and a successful communication with the tablet is required.
A. In case you do not add the partner as your friend, directly tap
“Remote Diagnose” in Fig. 6-6 to enter Fig. 6-11.
B. If you have added the partner into the Contact, tap
in Fig. 6-10
and select “Tech 2 Tech” from the pull-down option list.
Fig. 6-11
The Tech 2 Tech options are dened as follows:
Actions Results
To Next Page
