Matrix A7X-04 - Engineering Mode - Calibration Tab; Engineering Mode - Errors Tab

18
FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Auto Calibration This option calibrates the elevation parameters. N/A
Tune Incline 1 Top: Top: 2.0 Sets the maximum incline for incline motor 1. Top: 0.1 - 25.5
Tune Incline 1 Bottom: Bottom: 2.0 Sets the minimum incline for incline motor 1. Bottom: 0.1 - 25.5
Tune Incline 2 Top: Top: 2.0 Sets the maximum incline for incline motor 2. Top: 0.1 - 25.5
Tune Incline 2 Bottom: Bottom: 2.0 Set the minimum incline for incline motor 2. Bottom: 0.1 - 25.5
ENGINEERING MODE
End Points
6.2 ENGINEERING MODE - CALIBRATION TAB
ENGINEERING MODE FUNCTION & DEFAULTS DESCRIPTIONS MODIFIED
Errors This option displays the error code
history.
N/A
6.3 ENGINEERING MODE - ERRORS TAB
CHAPTER 6: ENGINEERING MODE