Matrix ETERNITY NE Quick Start 6
You will be able to use the VoIP interface only if the system is connected to the LAN network.
Selecting the Site
Select an appropriate site to install ETERNITY NENX. The site should:
• be well-ventilated, moisture and dust free, not exposed to direct sunlight, heat or excessive cold, or water,
away from water bodies and sources of water.
• be away from sources of electromagnetic noise such as any radio equipment, heavy transformers.
• have sufficient network coverage available, if the GSM/UMTS/LTE module is present in the system.
• This is an electronic device. Protect yourself from shock hazards. Never handle the product in power
ON condition. Always wear an electrostatic discharge prevention wrist strap/belt and use a grounding
mat when handling the product.
• Protect ETERNITY NENX from heavy voltages entering from CO trunk and Extension lines. Install
Primary Protection Modules (PPM) with Gas Discharge Tubes (GDT) and fuses on entry points for all
trunk lines and extensions.
• ETERNITY NENX contains a 3VDC/18mAh (Li-Al) alloy-Manganese Dioxide Coin Battery (ML 1220 -
Rechargeable) of diameter 12.5mm and height 2.0mm. Battery should be replaced only by authorized
dealers of Matrix. There is a risk of explosion if the Battery is replaced in an incorrect manner. Please
dispose-off used Batteries.
• For Safety Instructions, see “Protecting ETERNITY NENX and Yourself” in the ETERNITY NE System
Manual.
Getting Started
Unpack ETERNITY NENX and verify the package contents. In case, any of the items is missing or damaged,
contact your Dealer/Distributor.
Package Contents
3
• ETERNITY NENXIP50
• ETERNITY NE VS (VoIP Server Module, factory fitted)
• Power Adapter
• 8 GB USB 2.0 Pen-Drive (Flash Drive, factory fitted)
• RJ-45 Cable
• Power Cord as per country standard
• Wall Mounting Template
• Two self tapping screws and screw grips for wall mounting
You can view or download the Product documentation by scanning the QR code printed on the Product Label/
Packaging Label.
3. This is the common packaging list for all the variants. However, for ETERNITY NENX312 and ETERNITY NENX416, the VoIP module
is optional and is not send in the packaging content. You must purchase the same, if required.
To Next Page
Loading...
Need help?
General
