Matrix PRASAR UCS - Page 11

Matrix PRASAR UCS Quick Start 7
• There are 4 PCI Connectors for the VoIP module and four pairs of studs on the board.
• By default, one VOIP module is factory fitted, this is with the label M1, VOIP #1 on the board.
• Locate the label M2, VOIP#2 to affix the second module.
• Remove the screws on the studs for the module and keep them aside.
• Carefully hold the NX DBM VOCODER64 Module from the edges.
• Make sure you do not touch the PCB. Insert the NX DBM VOCODER64 Module into the PCI
Connector socket.
• Insert the NX DBM VOCODER64 Module into the PCI Connector socket.