Matrix PRASAR UCS Quick Start 22
Configuring PRASAR UCS
PRASAR UCS provides a Graphic User Interface (GUI), Jeeves, the proprietary web-based
configuration software of Matrix.
The accessibility to the web-based GUI is secured by a password.
To be able to access Jeeves,
• the LAN/WAN Port of SPARK200 must be connected with a stand-alone PC or in a LAN.
• a web-browser, either Internet Explorer 7 or later or Mozilla Firefox 3.5.1 or later, must be
installed on the PC.
If the computer for accessing Jeeves is connected in a LAN Switch and the WAN Port of SPARK200
is connected behind a NAT router, make sure that both the LAN and WAN connections are in different
Subnet Masks.
To access PRASAR UCS Jeeves,
• Open the browser (Internet Explorer/Mozilla Firefox) on the PC (Standalone or LAN PC) to
which the SPARK200 is connected.
• Make sure the IP Address of the computer and the LAN Port of SPARK200 do not conflict,
and that both are in the same Subnet.
The default IP Address of the LAN Port is: 192.168.2.100
The default Subnet Mask of the LAN Port is: 255.255.255.000
Change the Subnet of the computer, if necessary.
• In the address bar of the browser, enter https://192.168.2.100.
To Next Page
Loading...