Matrix PRASAR UCS Quick Start 9
There are two internal USB Ports:
• One Internal USB Port has a pendrive inserted into it (factory fitted).The pendrive which is
provided to you by default contains VMS data, Extended IP Phones firmware and the system
firmware. You will be able to use the VMS features once you activate the VMS License.
• The other Internal USB Port is for future use.
You can replace the default pendrive with a new one having more space.
To do so, you need to format your new pendrive with FAT32 file format and then copy all the
contents of the factory fitted pendrive into the new pendrive.
Switch-off the system and then replace the pendrive. The system will not detect the new
pendrive if you do not restart the system after replacement.
Make sure while replacing the pendrive, you insert it in the same USB Port where the factory fitted
pendrive was inserted.
After installing the modules into the system, place the cover and affix the screws.
Connect a computer to the LAN/WAN Port of system with the Ethernet cable supplied for the port.
Open a Web browser on the computer to access the embedded Web server, Jeeves.
Activate the Key provided in the License Voucher for the Application and VMS. For instructions,
see “Activating License Key”.
To Next Page
Loading...