Matrix PRASAR UCS - Page 15

Matrix PRASAR UCS Quick Start 11
• If you register the Extended IP Phone outside the Region/Country selected for PRASAR UCS, the
time and Time Zone dependent features, such as Alarms, Reminders, Time Zone Display, of the
phone at each location will operate according to the Real Time Clock of PRASAR UCS. Also,
Access Codes and Emergency Numbers will work according to the Region/Country selected for
PRASAR UCS
.
Consider the following Installation Scenario:
• Connect the Matrix VARTA WIN200, Extended IP Phone, or any Standard IP Phone to the LAN
Switch.
• Register any SIP device (Matrix VARTA UC Clients, Extended IP phone/ Soft clients or
Standard IP phone) on the public network as SIP Extension.
• When you register the Matrix Extended IP Phone and Standard IP Phones with PRASAR UCS,
the WAN/LAN port is used for Auto Configuration as well for Registration of the Extended IP
Phones.
For Auto Configuration, make sure you configure the Standard SIP phones at Location1 only.
• When you register a SIP device other than the Matrix Extended IP Phone on the public network
as SIP Extension, do the following:
• In this SIP device configure the following:
• the Registrar Server Address of PRASAR UCS
• the Registrar Server Port
•the SIP ID
• Authentication ID and Password.
•Configure Port Forwarding for the WAN Port of PRASAR UCS on the Router.