Matrix PRASAR UCS - Page 40

36 Matrix PRASAR UCS Quick Start
On the License Management page, click View Profile.
A new window opens which displays the Service Profile updated according to the license.
• Click Close.
• To log off, click Logout.
•
The current License Key and Service Profile will remain unchanged when the system is set to
default or the firmware is upgraded.
• If you have not purchased the license and you wish to use the features on trial basis, you can
use the Demo Provision. Demo Provision enables you to use the PRASAR UCS application, free
of cost for a period of 60 days.
• During the Demo Provision you can access and use all the features and functionalities
supported by the application.
• If you do not have the license for the PRASAR UCS Application and you do not start the Demo
Period, the system will allow the configuration and making calls but the connected calls will be
disconnected after 60 seconds
.
You may now configure the parameters of PRASAR UCS as per your requirement.