2 Matrix PRASAR UCS Quick Start
Ports and Connectors
You will be able to use PRASAR UCS only after you have activated the PRASAR UCS Application
license. For further details, refer “Activating License Key”.
PRASAR UCS also supports Redundancy. It is a process in which upon failure of one System, the
other System takes control of the active operation. For more information, refer Redundancy in the
System Manual.
LEDs
SPARK200 has two Power LEDs and a Status LED (STS).
Port Connector Description
24VDC-2.5A (Max) DC Jack1 To connect 24VDC, 2.5A Power Adapter.
24VDC-2.5A (Max) DC Jack2 To connect 24VDC, 2.5A Power Adapter (for Hot Redundancy).
LAN RJ45 To connect a computer or a LAN Switch.
WAN RJ45
To connect to the IP network over a DSL Modem or Router or a
LAN Switch.
USB
USB to COM
Converter
(Optional)
The External USB can be used as COM Port by connecting the
USB to COM Converter.
Used to:
• set up and run software applications — PMS and CAS.
• capture Hotel Motel Activity Logs.
• generate SMDR reports.
Reset Switch --- To default the LAN IP and the System Engineer password.
To Next Page
Loading...