Matrix SATATYA Professional Series User Manual

Accessing via Web Browser
The IP cameras are supported by Microsoft Windows Operating
System.
Steps,
• Run the web browser as administrator.
• In the browser address bar, type the IP address of the camera
e.g., 192.168.1.126 and press the Enter key to open the login
interface.
192.168.1.124
192.168.1.126
Network Configuration
To view and configure the camera via LAN (Local Area Network),
you need to connect the network camera in the same subnet with
your PC. Then install the software to configure the IP address.
Steps to get the IP address,
• Once the camera is connected to the network, it will automatically
be assigned a dynamic IP address by the DHCP server. You can
view the assigned IP address through any IP scanner utility.
• If DHCP server is unavailable or is not able to provide an IP address
then 192.168.1.126 will be set as default IP address.
• You can change the IP address and subnet mask of Camera from
the Basic Settings page of camera.
21
22
In Internet Explorer you can access the camera with Matrix
ActiveX plugin. In other browsers you need to install
Quicktime or VLC plugin.

Matrix SATATYA Professional Series Specifications

General

Brand	Matrix
Model	SATATYA Professional Series
Category	Security Camera
Language	English