21
22
If you are connecting devices such as Sensor and small
Buzzers to the Alarm IN and Alarm OUT, you may need to
connect an external power source if their power requirements
are not fulfilled with the camera adapter.
If you are connecting devices such as Mic and Speaker to the
Audio IN and Audio OUT, you may need to connect an external
power source if their power requirements are not fulfilled with
the camera adapter.
Alarm Out
Audio Out
M12 4-Pin
Female
Connector
DC
Connector
Alarm IN
Audio IN
Powering the Camera
Connect the M12 4-Pin Male connector of the cable to the M12 4-Pin
Female connector of the camera cable.
Make sure the pins are aligned, and if there is a threaded connection,
make sure you secure it properly as M12 connectors often have
threaded design for secure connection.
Connect the other end of the M12 4-Pin Male connector cable to the
Mobile NVR device or client. Make sure the pins are aligned and
secure the connection.
OR
You can also connect a 12V DC Adapter (not provided by Matrix) to
power the camera. Make sure you use a BIS, CE, ROHS and FCC
approved Adapter.
To Next Page
Loading...
