Matrix SETU VFX - Connecting SETU VFX

Matrix SETU VFX Quick Start 5
•SETU VFX Unit
• Power Adapter - 12VDC, 2A (Country Specific)
• Ethernet Cable (RJ45)
•Line Cord (RJ11)
1
• Two Screws M7/30 with grips
• Mounting Template
• Warranty Card Set
If any of these items is missing or damaged, please contact the dealer/reseller from whom
you purchased the system.
• Place the system at the selected site.
If you are mounting the system on a wall, refer to the mechanical dimensions of the product
and use the mounting template for drilling holes on the wall.
Connecting SETU VFX
SETU VFX880 (VoIP-FXO Gateway)
1. Applicable only for VoIP-FXS Gateway.
PSTN
Power
Adapter
LAN Switch/ Hub
Computers
IP
Network
DSL Modem/ Router