Need help?Do you have a question about the Matrix SETU VFX and is the answer not in the manual?
General| Protocols | SIP, H.323 |
|---|---|
| FXO/FXS Ports | 16 |
| Ports | T1/E1/PRI, FXO/FXS, Ethernet |
| Codecs | G.711, G.729 |
| Redundancy | Optional Power Supply Redundancy |
Introduces the SETU VFX product and its available configurations, detailing Voice, FXO, FXS, WAN, LAN, and Lifeline ports.
Lists essential items and safety precautions required before proceeding with the installation of the SETU VFX unit.
Provides initial steps for installation, including site selection and unpacking the SETU VFX unit.
Illustrates the physical connections for the SETU VFX880 (VoIP-FXO Gateway) to power, PSTN, and network devices.
Guides on connecting the SETU VFX to a network via DSL modem/router or LAN switch using Ethernet cables.
Explains how to connect Analog Trunk lines from CO Network/PSTN to the FXO Ports of the SETU VFX.
Details connecting standard telephones, fax machines, or PBXs to the FXS Ports using RJ11 cables.
Instructions on connecting the power adapter and powering on the SETU VFX unit, observing the initialization cycle.
Describes how to connect a computer to the SETU VFX via LAN for accessing the Jeeves web-based configuration interface.
Guides users through changing the default SE password for enhanced security when accessing the SETU VFX configuration.
Explains how to use the configuration wizard for step-by-step setup of basic SETU VFX parameters.
Details how to manually configure specific SETU VFX parameters by selecting them from the interface.
To Next Page
