28
STEP 5 | PREMIUM KIT ASSEMBLY INSTRUCTIONS & NOTES
PART 6: PREMIUM KIT ASSEMBLY
1. Remove the end caps using a 3 mm Allen wrench. 2. Cut off and
discard the grips. 3. Remove inner collars with a 3 mm allen wrench.
4. Assemble the ASG grips (4P) as shown; lock inner collars using
a 4 mm Allen wench (torque to 8 N-m/5 ft-lbs.), and a 3 mm Allen
wrench to secure the end caps. 5. Orient ASG grips as shown.
ASG Grips
ASSEMBLY
To Next Page
Loading...
