1.09
General Information
TI008G0001
Settings to be made by customer
Unless different contractual agreements are taken, the following items are normally at customer’s ex-
pense:
❑ room preparation (including building works, such as foundations or canalizations, etc, if required);
❑ anti-slip, levelled ooring;
❑ observing the dimensions given in the layout drawing when preparing the site and when installing
the machine itself;
❑ preparation of auxiliary services, suitable for the system requirements (such as electricity supply,
pneumatic system, etc)
❑ preparation of the electrical equipment in compliance to Directive 2006/95/EEC;
❑ adequate lighting complying with EN 60204-1 Standard;
❑ any safety devices upstream and downstream of the electrical supply lines (like differential switches,
earthing systems, safety valves, etc) foreseen by the current laws in the country of installation;
❑ earthing equipment complying with CEI 64-8 Standard;
900a
To Next Page
Loading...
Need help?
General
