3.06
Description of the Machine
TI008G0001
The device allows for:
- User Interface in 8 languages (Italian, English, French, German,
Spanish, Polish, Czech, Portuguese)
- Weekly and time schedule of starts and stops
- immediate reading on display of data relevant to the compressor
operation:
❏ Compressor hours of activation and line pressure of the equip-
ment
❏
Pressure oil chamber
❏ Output air temperature and compressor oil temperature
❏ Hours of running and hours of loading
- Programming of basic parameters for optimum operation of
compressor accessible by user:
❏ Control modes of compressor (Local/remote, master/slave)
❏ Operation modes (Automatic, Continuous)
❏ The advanced programming of parameters, protected by
“password” allows the qualied engineer to change those
parameters to which the user cannot access directly
- Checking the input and output status of the gear case to detect
any failure in the compressor electric equipment
- Storage of up to 20 failure events
- The check of the integrated dryer (plus models)
- The remote control by clean contacts of the machine status be-
low:
❏ Activated compressor (optional)
❏ Running compressor (optional)
❏ Compressor under load (optional)
❏ Compressor blocked (standard)
Communication
MAESTRO
xs
, connected to the Mattei supervision device (optional),
allows for:
- Remote monitoring by web interface
- Alarm signaling by e-mail, fax or mobile phone.
WARNING !!!
The compressor has been designed to compress AIR ONLY.
The compression of other gases is FORBIDDEN.
098