23
5. For proper tightness
1 Tilt the tool 45° angle to the crossed re-bars.
2 Apply the tool perpendicularly to the surface
of the crossed re-bars.
During tool operation
• Do not move the tool during tying operation un-
til the tool stops tying automatically.
3 Tie in alternate direction.
4 Cross tie.
Bent the tail of the first tie before making the
second tie.
5 When you need extra tightness, place re-
bars at the top of the Arm part.
45°
Arm
Arm
Re-bars
To Next Page
Loading...
Need help?
General
