Max SN890CH 34 - Driving Depth and Trigger Lock; Depth Adjustment Procedure; Trigger Lock Mechanism; Removing Jammed Nails

DRiV:NGDEPTHAD」
uSTMEN丁
WARNING
ALWAYSdisconnectairsupp:ybeforemaking
adiuStment.
Thed百
vingdepthadiustmentismadebyadiuSt―
ingtheAdiustmentDial
①wnhairpressureset,dr市
eafewnalに intoa
representativernaterialsampletodetermine
radiustmentisnecessary.
② lfadiustmentisrequired,disconnectairsup―
ply
③ RefertothemarkontheContactArmarea
fordirectiontoturntheAdiustmentDial.
④Re―
connectairsup口
y.
TRIGGER
LOCK MECHANISM
The
tool
is
equipped with a Trigger Lock Mecha-
nism. Push
and rotate
the
Trigger from LOCK
to
the
Trigger
UNLOCK
position
before
driving
nails.
WARN:NG
ALWAYSdisconnectairsupplybeforeremov‐
ingiammednails.
Trigger
Lock Dial
言
面
REMOVINGJAMMEDNAILS