www.maxcessintl.com MAGPOWR CL Load Cells MI 850A192 J 1
Proper use
The load cell devices are intended to be used on machines or
systems to monitor the tension in a web via the customer’s
cantilever shaft and roll assembly installed in the load cell.
Indoor operation.
Improper use
Operation outside the technical specifications
Operation in an Ex-area or intrinsically safe area without a proper
barrier.
Any other use than the proper use shall be deemed inappropriate
Installation and commissioning
Any load cell device which is damaged must not be installed or
put into operation.
Only perform installation, maintenance or repair tasks on the load
cell device when the machine has been stopped and is secured
from being turned on.
Only perform installation, maintenance or repair tasks on the load
cell device when there is no electrical power in the system.
The load cell device must be securely mounted before being
placed in operation.
No modifications may be made to the load cell device.
Do not place electrical cables under mechanical strain.
WARNING – Danger of injury from crushing.
Maintenance and repair tasks on the load cell device must be
performed only when the machine has been stopped and has
been secured from being turned on again.
The load cell must be disposed of in accordance with all the
applicable national, state and local regulations.
To Next Page
Loading...
