EasyManua.ls Logo

Maxcom MM28D HS

Maxcom MM28D HS
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
12
choose Dial or Save to SIM card or phone.
DRAFTS
1. In on-hook state, press MENU/OK key + 2 key to enter the Messages interface, the cursor
stops at Write message
2. Press UP or DOWN key to move the cursor to Drafts, press MENU/OK key to confirm
and enter the submenu with a list of messages failed sent but saved in the draft
3. Press UP or DOWN key to select the message you want to check the content
4. Press MENU/OK key to confirm and the content of the message is displayed on LCD.
5. After finished reading the message content, press MENU/OK key to confirm and then you
can do the rest operations the same with outbox.
USE TEMPLATES
1. In on-hook state, press MENU/OK key + 2 key to enter the Messages interface, the cursor
stops at Write message
2. Press UP or DOWN key to move the cursor to Use templates, press MENU/OK key to
confirm and enter the submenu with a list of template message
3. Press UP or DOWN key to select your desired template
4. Press MENU/OK key to confirm and enter the submenu of Edit, Erase, Write message
5. Press UP or DOWN key to select and do relevant operations to the following:
1) Edit: do some change to message content on the template such as adding some contents
2) Erase: delete the original message content on the template
3) Write message: it is similar with Edit.
MESSAGE SETTINGS
1. In on-hook state, press MENU/OK key + 2 key to enter the Messages interface, the cursor
stops at Write message
2. Press UP or DOWN key to move the cursor to Message settings
3. Press MENU/OK key to confirm and enter the submenu of Profile settings, Common
settings, Memory status
4. Press UP or DOWN key to select your desired one and do relevant operations to the
following:
1) Profile settings : It includes the MSC no(it means the message center number, you can
erase the number using BOOK/DEL key and input a new number using digit key ), Validity(it
means the period of validity, you can press UP or DOWN key to select 1 hour,12
hours,1day,1 week or maximum), Type(it means the mode the message will be sent in,
totally Email ,Page ,Text, Fax for selection)

Related product manuals