EasyManua.ls Logo

Maxcom MM28D HS

Maxcom MM28D HS
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
20
2. Press UP or DOWN key to move the cursor to Extra tone
3. Press MENU/OK key to confirm and enter the submenu of Warning, Error, Campon and
connect.
4. Press UP or DOWN key to select and press MENU/OK key to confirm.
Organizer
TO DO LIST ADDING (The list of things to do)
1. In on-hook state, press MENU/OK key + 6 key to enter the Organizer interface, the cursor
stops at To do list
2. Press MENU/OK key to confirm and enter the submenu with time of task list
3. Press UP or DOWN key to select one
4. Press MENU/OK key to confirm and enter the submenu of Add, Edit, Delete, Delete all
5. Press UP or DOWN key to select and do some operations to the following:
1) Add: use numerical keys to edit the year, month, date, time, content of task and its stay
duration and press MENU/OK key to save it.
2) Edit: it is similar with Add
3) Delete: select one record in the to do list and then delete it
4) Delete all: delete all the records in the To do list.
ALARM CLOCK SETTING
1. In on-hook state, press MENU/OK key + 6 key to enter the Organizer interface, the cursor
stops at To do list
2. Press UP or DOWN key to move the cursor to Alarm
3. Press MENU/OK key to confirm and LCD displays 3 groups of alarm time
4. Press UP or DOWN key to select one group, press MENU/OK key to enter the
submenu with alarm status (default as Off) and the alarm time
5. Press SET key to enter the submenu operation, use UP or DOWN key to select the
alarm status from Off, Once, Everyday and use digit keys to edit the alarm time.
6. Press MENU/OK key to save.
7. Repeat the above steps for the additional alarm clock setting.
CALCULATOR FUNCTION
In on-hook state, press MENU/OK key + 6 key to enter the Organizer interface and then press
UP or DOWN key to select Calculator and then press MENU/OK key to enter the
calculator mode ,the unit is available for operation of +.-.×.÷”. In the calculator state, MENU/OK
key is used as “= and the * key is used as “., LEFT and RIGHT key are used as × and ÷
respectively. UP or DOWN key is used as sign of positive/negative.

Related product manuals