Maxcom MM920 User Manual

10
Prior to inserting the SIM Card, make sure the phone is
switched off, and the is battery removed. Charger should
be unplugged. To insert the SIM Card, first remove the
battery as shown in the drawings and instructions:
• With the phone switched off, place the phone with
its screen face down, and then use a screwdriver
to unscrew four bolts (if they are in place), and
gently remove the battery cover by lifting it up from
its bottom.
• Remove the battery by lifting it up with your
fingernail from the bottom of the phone.
• Release the SIM Card slot tray by sliding it
upwards, and then open it. Insert the SIM Card
to the slot located on the left edge of the phone,
with metal contacts facing down. Make sure to
position the notch of the card going down of the
phone.

Maxcom MM920 Specifications

General

Display diagonal	2.8 \
Display resolution	240 x 320 pixels
Calculator	Yes
Standby time	460 h
Compatible memory cards	MicroSD (TransFlash)
Maximum memory card size	32 GB
Rear camera resolution (numeric)	2 MP
SIM card capability	-
2G bands (primary SIM)	900, 1800 MHz
Mobile network generation	2G
Form factor	Bar
Personal info management (PIM)	Alarm clock, Calculator, Calendar
Cables included	USB
Subscription type	No subscription
Product color	Yellow
Battery capacity	- mAh
Standby time (2G)	- h

Weight and Dimensions

Depth	14 mm
Width	64 mm
Height	139 mm
Weight	140 g