Maxell MXSP-TS1000 - Bluetooth Music Playback; General Operation; Powering On;Off and Standby

EN
EN-13
Connections
You can listen to music from a Bluetooth - enabled device via this player.
Thefirsttimeyouconnectyourdevicetothisplayer,youneedtopairyourdevice to
this player.
Note:
- The operational range between this player and a Bluetooth device is approximately
8m (26 ft).
- Before you connect a Bluetooth device to this unit, familiarize yourself with the
Bluetooth capabilities of the device.
- Compatibility with all Bluetooth devices is not guaranteed.
- Any obstacle between this unit and a Bluetooth device can reduce the operational
range.
- Keep this player away from any other electronic device that may cause interference.
1 DuringONmode,presstheSOURCE button repeatedly on the unit or the BT PAIR
button on the remote control to select Bluetooth mode. The Blue indicatorwill
flashslowly.
2 The system has entered pairing mode.
- Or press and hold the BT PAIR button on the remote control to be searchable. The
Blue indicatorwillashfast.
3 Activate your Bluetooth device and select the search mode. “MXSP-TS1000” will
appear on your Bluetooth device list.
4 Select “MXSP-TS1000” in the pairing list. The Blue indicator will light up solidly while the
pairing succeeds.
- To disconnect the Bluetooth function, switch to another function on the unit or disable
the function from your Bluetooth device. The Blue indicatorwillflashslowly.
Tips:
1 Enter "0000" for the password if necessary.
2 If there is an existing connection, press and hold the BT PAIR button on the remote
control to re-activate the pairing mode, the connection will be interrupted. The Blue
indicatorwillashslowly.
3 If no other Bluetooth device pairs with this player within two minutes, the player will
recover its previous connection.
4 The player will also be disconnected when your device is moved beyond the
operational range.
5 If you want to reconnect your device to this player, place it within the operational
range.
6 If the device is moved beyond the operational range, when it is brought back, please
check if the device is still connected to the player.
7 If the connection is lost, follow the instructions above to pair your device to the player
again.
Connect to a Bluetooth Devices
Pair the Bluetooth-enabled devices
Connections
- IftheconnectedBluetoothdevicesupportsAdvancedAudioDistribution
Profile(A2DP),youcanlistentothemusicstoredonthedevicethroughtheplayer.
- IfthedevicealsosupportsAudioVideoRemoteControlProle(AVRCP),youcanuse
the player's remote control to play music stored on the device.
1. Pair your device with the player.
2. Playmusicviayourdevice(ifitsupportsA2DP).
3. Use supplied remote control to control play (if it supports AVRCP).
- To play/pause the music, press the
BF
button on the remote control.
General Operation
Standby/ON
Whenyourstconnectthemainunittothemainssocket,themainunitwillbeinStandby
mode.
- Press the
button on the unit or on the remote control to switch the unit ON.
- Press the
button again on the remote control or on the unit to switch the unit back to
STANDBYmode.ThestatusindicatorwilllightupRed.
- DisconnectthemainsplugfromthemainssocketifyouwanttoswitchtheunitOFF
completely.
- When there have no audio signal input or the signal from Aux is too low, the Auto-Off
function will be activated. If the situation occur for 15minutes, the Soundbar will
switch to standby mode automatically.
Mute Sound
- PresstheMUTEbuttonontheremotecontroltomute.Pressthisbuttonagain
orpress the VOL+ / VOL- buttons on the unit or on the remote control to
resume normal listening.Thelightindicatorontheunitwillblinksoundresumes.
Select Modes
Press the SOURCE button repeatedly on the unit or press the AUX, OPTICAL, BT/PAIR
buttons on the remote control to select the desired mode.
- In AUX mode: the status indicator lights up Green.
- In OPTICAL mode: the status indicator lights up Orange.
- In Bluetooth mode: the status indicator lights up Blue.
Listen to music from Bluetooth device
- To skip a track, press the buttons on the remote control.
H
,
G