6.2 Cascading Two Speakerphone Wirelessly
Wireless cascading only works under Bluetooth connection. Please refer to the following
steps on how to connect Speakerphone using wireless cascade mode.
① Connect your mobile device or computer to one of the speakerphones, either via direct
Bluetooth connection or through USB Bluetooth dongle.
② Double click on the Bluetooth button of both the Speakerphones to start the cascade
mode.
③ The blue light flashes quickly during cascading
④ If the cascading is successful you will hear the tone "cascade is connected". The
Bluetooth light stopped flashing and stays on.
⑤ Pairing is successful: Both speakerpohones are now connected in synchronous. You can
adjust the volume, or mute/unmute from either of the speakerphones.
⑥ Double click the Bluetooth button on either one of the Speakerphones will disable the
cascade connection.
9
To Next Page
Loading...
