34
* Operations to be carried out only by authorised installer workshop
Fault
Tension lack in the control box (green led
out).
A manoeuvre does not work.
Cause
Discharged battery.
Burned fuses.
Disconnected electric coupling
Defective switch
Burned solenoid.
Locked valve cartridge
Damaged electric connection.
Remedy
Recharge the battery.
Replace the fuses.
Join correctly the connection.
Replace the electric coupling.*
Replace the switch
Replace the solenoid.
Disassemble and clean the valve cartri-
dge
Check continuity of the circuit
To Next Page
Loading...
