1.9 Packaging, transportation and storage
The machine is packaged in a wooden or cardboard crate on a pallet having dimensions and features suitable for the type
and weight of the machine. The machine will be delivered packaged, ensuring that it is protected from the elements.
Each package is marked with the following information:
• Type of machine, model and serial number
• Net and gross weight
• Machine destination
Labels are applied on the package to indicate the following:
• Handle with care
• This way up
• Protect from rain
• Do not stack
• Protect from heat sources
• Fragile
1.9.1 Transportation, lifting and handling
When the machine is delivered, check that during transportation in addition to visible damage no other damage was caused
which could compromise correct operation. On the delivery note, write “Subject to approval” to show that acceptance of the
machine is subject to checks. If any damage is found, within 48 of receiving the machine, report the damage to the haulier
and the manufacturer.
Use a pallet truck or a fork-lift truck, inserting the forks in the holes in the pallet. Use equipment with suitable load-bearing
capacity.
1.9.2 Machine storage
The package must not be subjected to impacts, vibrations and other loads.
The machine must be stored indoors, in an area free of aggressive agents, at a temperature not lower than +2 °C, not higher
than +55 °C and with a humidity level of between 10% and 95% (without condensation).
To Next Page
Loading...
