aLaRms stop the machine, With an emeRgencY stop message dispLaYed on the con-
tRoL paneL. to RestaRt the machine, YoU mUst eLiminate the caUse of the emeRgencY.
8 TROUBLESHOOTING
Most faults and problems during machine operation are promptly automatically indicated by the machine.
People involved in troubleshooting:
- Operator: person trained in the ordinary operation of the machine who performs initial fault-finding and if possible,
by following the instructions in Chapter 7 (Routine maintenance), removes the causes of the fault and restores correct
machine operation.
- Technical assistance service: qualified technician, called to work on the machine after a request for help, as
specified in sec. 1.5.1 of this manual.
To Next Page
Loading...
