Maxima 2 - Page 45

!
Chapter 8
Troubleshooting
45
Contact the Technical assistance
service.
YES
Internal machine fault.
NO
Remove the valve and wash it as de-
scribed in section 6.1.1, point “b”.
YES
The air adjustment valve is
blocked.
NO
Replace the type of liquid cream.
YES
The liquid cream has a too low fat
content or is too sugary.
NO
Open the valve by turning the adjustment
knob in an anticlockwise direction to a
higher position.
YES
The air valve is in a position that
is too closed.
THE CREAM DISPENSED IS WET AND NOT STIFF ENOUGH (WET-NOT STIFF)
Contact the Technical assistance
service.
YES
Internal machine fault.
NO
Contact the Technical assistance
service.
YES
The electrical specifications of the
overload switches or fuses are not
suitable.
NO
Contact the Technical assistance ser-
vice.
YES
The capacity of the electrical sys-
tem is not sufficient to power the
machine.
MACHINE REPEATEDLY TRIPS THE
ELECTRIC OVERLOAD SWITCHES OR BLOWS THE MAINS FUSES.