To Next PageTo Next Page
Need help?Do you have a question about the Maximum Controls MAX 1500 and is the answer not in the manual?
General| Maximum Gate Weight | 1500 lbs |
|---|---|
| Number of Remotes | 2 |
| Duty Cycle | Continuous |
| Remote Control Range | 100 feet |
| Motor Type | DC Motor |
| Safety Features | Auto-reverse, Obstruction Detection |
Warnings to reduce the risk of injury or death. Read and follow all instructions.
Defines UL 325 classifications for gate operators based on usage scenarios.
Specifies required entrapment protection for different gate types and classes.
Details installation requirements to comply with UL 325 standards for gate operators.
Details the standard installation of the gate operator in the front mounting position.
Instructions for connecting the drive chain to the gate for front mounting.
Details the alternate installation of the gate operator in the rear mounting position.
Details on installing photocell entrapment protection for safety.
Instructions for installing sensing edge entrapment protection for safety.
Information on installing in-ground loops for vehicle detection and safety.
Instructions for wiring the high voltage AC power input to the gate operator.
Procedure for safely turning the gate operator power ON and OFF.
Wiring overview showing connections for the Matrix 1 control board.
Understanding UL entrapment LEDs for safety activation and troubleshooting.
Connecting a normally open closing photocell for safety.
Using the gate shut-off switch to disable operator functions for servicing.
Installing and adjusting limit sensor activators for gate positions.
Adjusting the ERD sensor sensitivity for entrapment protection.
Services and checks to be performed by a qualified technician.
Manual release procedure to move the gate when power is off.
