To Next PageTo Next Page
Need help?Do you have a question about the Maximum Controls MAX 2200 PRO and is the answer not in the manual?
General| Max. Gate Weight | 2200 lbs |
|---|---|
| Motor Voltage | 24V DC |
| Operating Voltage | 24V DC |
| Power Supply | 120V AC |
| Operating Speed | 12 inches per second |
| Weight | 10 lbs |
| Max. Gate Length | 40 ft (12 m) |
Key safety instructions, including operator testing and maintenance.
Specifies minimum two sensors and monitoring requirements for safety.
Rules for opening devices, wire mesh, and gate safety.
Choice between standard front and alternate rear mounting positions.
Steps for chain connection, AC power, grounding, and direction settings.
Detailed instructions for wiring entrapment protection sensors.
Procedures for programming virtual limits, gate positions, sensors, and Matrix III settings.
Using USB port for diagnostics and testing entrapment sensors.
Common gate cycling problems and Matrix III LED status interpretation.
