49
options / unique Features
partial open feature
This feature controls a long gate’s normal open and close stopping positions compared to emergency situations that require
the gate to ALWAYS FULLY OPEN. It is important to have FULL ACCESS in time of emergency but this occurs much less than
the normal daily operations. MAX operators will EASILY operate in either circumstance. A long gate may not need to fully open
to allow normal access, especially in high traffic areas where gate cycling time can be reduced between vehicles and still allow
normal daily operations to occur. Time between vehicles can be greatly reduced, not to mention all of the benefits that occur
when using PARTIAL OPEN.
“Like NO other Gate Operator in the World”
• Less wear and tear on the gate operator.
• Less maintenance and repairs.
• Less power consumption.
• Less time between gate cycles.
• Better access control of the area.
• Better security of the area.
Partial Open turned ON
Normal Daily Access
Any Normal Opening Input
on Matrix 1
Partial Open turned ON
Emergency Access
FIRE DEPT Input or
MAX Input on Matrix 1
- Partial Open -
- Fully Open -
To Next Page
Loading...
