C o n f i g u r a t i o n a n d M a n a g e m e n t
Datamax is configured via a web interface. In order to access the
Datamax web interface you will need a computer with a spare Ethernet
LAN port. The LAN card configuration should have the Internet Protocol
TCP/IP set to obtain an IP Address automatically and obtain DNS server
address automatically.
To check these settings go to your LAN adaptor properties and check
your Interment Protocol TCP/IP settings, it should look as follows:
Connection Steps:
1. Connect the Ethernet cable supplied with your router to your
computer Ethernet LAN port
2. Your computer will get an IP address from the Datamax DHCP
range automatically.
To Next Page
Loading...
