Maxon DataMax MA100-1010 - Backup and Restore Settings

Page - 30 -
System
Firmware Version
Software version information
Module
The Wireless module used to connect to the internet
Signal
Packet protocol type TCP, UDP or TCP/UDP
Network
Packet’s source port
Internet Port
Status
WAN connection Online/ Offline
IP Address
WAN IP Address
Gateway
WAN Gateway Address
Domain Name
Server
The ISP DNS
LAN Port
IP Address
LAN IP Address
DHCP
Enabled/ Disabled
IP Subnet Mask
Subnet mask of the LAN IP Address
Wireless Port
Name
SSID name
Region
Country
Channel
Frequency that the WIFI operates on
Mode
802.11g and 802.11b
Wireless AP
Wireless AP is enabled/Disabled
Backup Settings
You can save your router configuration by clicking on the backup
button; this will prompt you to save the configuration file to your local
hard drive
Note: Do not edit the saved file. If the file used to restore configuration is
not correct, the router will restore to a factory default setting.