Maxon RA-45 - MAX SOL Solar Box Add-on; Solar Box Add-on Kit Parts

Page 11 of 36 M-21-08 REV.B
Addendum A
Addendum A
MAX SOL add on Solar Box for Domino’s RA-45
Parts in Solar Box add-on kit
Item
Description
Qty
Where Used
1
Solar Box Assembly
1
Step 1. Solar Box to Lift Frame Channel.
2
Bolt, 3/8-16 x 1-1/2” GR8
2
Step 1. Solar Box to Lift Frame Channel.
3
Locknut, 3/8-16
2
Step 1. Solar Box to Lift Frame Channel.
4
Quick disconnect, ¼ male, fully insulated, red
1
Step 2. WAYPOINT to Charge Controller
5
Quick disconnect, ¼ female, fully insulated, red
1
Step 2. WAYPOINT to Charge Controller
6
Clip on barrel nut, ¼-20
4
Step 3. Charge Controller.
7
Bolt, ¼”-20 x ¾”
4
Step 4. Charge Controller to Solar Box.
8
Washer, ¼”
4
Step 4. Charge Controller to Solar Box.
9
Lock washer, ¼”
4
Step 4. Charge Controller to Solar Box.
10
Ring terminal, 3/8”, 18-22 ga.
2
Step 10. WAYPOINT to J-box
11
Ring terminal, 3/8”, 8 ga.
2
Step 11. Charge Controller B+, B- to J-Box
12
Ring terminal, #10, 18-22 ga.
3
Step 12. Wall switch harness to J-Box
1
2
3
4
5
6
7
8
9
10
11
12