11
NOTE: Preferred decal layout is shown, Decals on the Liftgate are
attached at the factory. If vehicle does not permit this layout,
decals in the manual and decal kit must be applied so that they
are easily visible when approaching vehicle to operate Liftgate.
Use good common sense when locating these decals on
vehicle.
DECALS
NOTE: Ensure there is no residue, dirt or corrosion where decals
are attached. If necessary, clean surface before attaching
decals.
CAPACITY DECAL
SEE TABLE 11-1
STOW WARNING DECAL
P/N 282847-02
FIG. 11-1
DECAL “A”
DECAL “F”
DECAL “C”
DECAL “B”
WARNING DECAL
P/N 265736-03
INSTRUCTION DECAL
P/N 285800-01
MODEL DECAL P/N CAPACITY DECAL
TE-15 220386 1500 POUNDS
TE-20 220387 2000 POUNDS
TE-25 220382 2500 POUNDS
TE-30 220388 3000 POUNDS
TABLE 11-1
To Next Page
Loading...
