Maxon TE-15 - RECOMMENDED DAILY OPERATION CHECKS

8
RECOMMENDED DAILY OPERATION CHECKS
 Make sure vehicle battery is fully charged and battery terminal connec-
tions are clean and tight.
 Visually check that pump cover is bolted on securely and undamaged.
Lookforhydraulicuidleakingfromthepumpbox.
Before operating the Liftgate, the operator should do the following:
 Visually check that control switch is in place and undamaged.
Use the operation instructions in this manual to lower the Liftgate to
the ground and open the platform and ipover.
 Check main frame, lift arms, parallel arms and platform openers for
cracks and bends. Make sure rollers, on the platform openers, roll
freely. Also, make sure all bolts and pins are in place and undamaged.
 Visually check for cracks and bends on the extension plate. Also, make
sure fasteners are in place and undamaged and extension plate is
clean (no oil, debris, or corrosion).
 Check the hydraulic cylinders for leaking seals and hose connections.
Follow the hydraulic hoses (or return lines for gravity down Liftgates)
from the cylinders to pump box. Make sure all hoses are connected at
bothendsandtherearenocracks,chang,anduidleaks.
 Make sure main frame, lift arms, parallel arms and platform openers are
clean (no oil, debris, or corrosion).
 Visually check that all decals are in place (see DECALS page). Also,
make sure decals are legible, clean, and undamaged.
NOTE:BeforeyouchecktheLiftgate,parkvehicleonat
ground and set the parking brake.
NOTE: If any of the following operation checks reveal a
need to service or repair Liftgate, do not operate
theLiftgateuntilaqualiedmechanicservicesor
repairs the Liftgate.