9
With the platform at vehicle
bed height and no load on
platform, outboard edge
of platform must be higher
than extension plate as
shown in the YES illus-
tration (FIG. 9-1). If the
platform is tilted up like the
YES illustration, you can
operate Liftgate. If platform
is level at bed height like the
NO illustration (FIG. 9-2),
do not operate the Liftgate.
(See NOTE at beginning
of the DAILY OPERATION
CHECKS.)
PLATFORM AT BED HEIGHT
FIG. 9-1
NO
PLATFORM AT BED HEIGHT
FIG. 9-2
YES
LEVEL
LINE
LEVEL
LINE
To Next Page
Loading...
