11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
14
VEHICLE FRAME CUTOUT FOR PLATFORM CLEARANCE
(44” TO 38” BED HEIGHT)
FIG. 14-1
PLATFORM CLEARANCE
CUTOUT AREA
(WITHIN DASHED LINES)
TRUCK
FRAME
TRUCK BODY
BODY CROSS MEMBERS
BODY FLOOR
9-1/2”
REAR SILL
19-1/2” MIN
VEHICLE REQUIREMENTS - Continued
NOTE: The platform cutout area shown below applies to trucks. If the rear sill di-
mension is taller than 4” it may need to be modifi ed. Check with body
manufacturer before modifying the rear sill.
4”
To Next Page
Loading...
