11921 Slauson Ave. Santa Fe Springs, CA. 90670 (800) 227-4116 FAX (888) 771-7713
15
VEHICLE REQUIREMENTS - Continued
NOTE: The platform cutout area shown below applies to trucks. If the rear sill dimen-
sion is taller than 9” it may need to be modifi ed. Check with body manufac-
turer before modifying the rear sill.
TRUCK BODY
VEHICLE FRAME CUTOUT FOR PLATFORM CLEARANCE
(54” TO 44” BED HEIGHT WITH WALK RAMP)
FIG. 15-1
PLATFORM CLEARANCE
CUTOUT AREA
(WITHIN DASHED LINES)
TRUCK
FRAME
BODY CROSS MEMBERS
BODY FLOOR
REAR SILL
19” MIN
9”
To Next Page
Loading...
